Chord Hugo 2 Transportable DAC Headphone Amplifier
1 in stock
Chord’s new Hugo 2 digital to analog converter (DAC) and headphone amplifier continues to inspire a revolutionary high fidelity in portable music listening from the innovative makers at Chord Electronics in Kent England. Timing accuracy, noise reduction, and dynamic range are a few of the sonic performance improvements headphones, and stereo listeners will feel as much as hear with the Chord Hugo 2 DAC and Amp.
The most advanced field-programmable gate array (FPGA) and highly advanced watts transient aligned (WTA) filters bring vast improvements to the Chord Hugo 2 sound via headphones, in-ear monitors (IEMs) or stereo gear.
Digital Inputs and Outputs
The Chord Hugo 2 has four digital inputs: optical, coaxial, HD USB and extended-range Bluetooth with file playback up to 768kHz and DSD512 (Octa DSD) via HD USB input so very high resolution coming in means great sound going out. Two RCA, 3.5mm, and 6.35mm headphone analog outputs cover playing music to just about every headphones, in-ear monitors, and pre-amplifier imaginable.
The Chord Hugo 2 brings power and do-it-yourself (DIY) beauty to portable DAC and headphones amplifiers high fidelity sonic performance. Like warm and soft or precise and dynamic when you listen to music? Chord Hugo 2 provides a four-function filter to change the sound and sonic performance by manipulating a simple switch. The Hugo 2 creates listening power and flexibility for listeners – a future audio gear trend we suspect.
Crossfeed for Headphones
If you like the new Focal “speakers on your head” headphones listening experience you’ll be glad to know the Chord Hugo 2 retains Hugo’s popular digital crossfeed function with three options. Hugo 2 cross-feeds a 400-millisecond delay in shaping music from left and right output to the different channels based on advanced binaural audio research to emulate the effect of listening to music in a room with a stereo and speakers.
The Portable DAC That Can Stay Home Too
The Chord Hugo 2 features a new precision-machined aircraft-inspired aluminum case. A sharper lower profile with four now larger but still round control buttons makes the Hugo 2 a more portable DAC and headphones amp than its predecessor. Clearly, the new Hugo 2 design speaks to the portable DAC success achieved by the Chord Mojo DAC. The company anticipates greater “indoor” usage too by including a full-featured remote control.
Battery life makes a significant contribution to any portable DAC or headphone amplifier. Chord Hugo 2 battery life is around seven hours with two “automatic charging” modes via dedicated Micro USB charging port: fast or 1.8 amperes and slow coming in at less than one ampere. The Hugo 2 includes a battery charge indicator and status gauge.
“It’s very impressive how Moore’s Law is giving Chord more powerful, less power-hungry FPGAs year by year and they are taking great advantage of it. The technology in the regular DAC chips, such as ESS, isn’t progressing at such a rapid rate. I listened to the audio recording that Chris put up of John Franks and Rob Watts talking about the new kit. It was incredible to hear that Rob Watts dreamed of a million tap filter in the early 80s and never believed it would be possible, and now 35 years later he’s able to announce a product with such a thing in it.”
Richard Dale on Head-fi.org
Chord Hugo 2, Smartphones and Dragon Audio Cables
Now that the Chord Mojo isn’t the only portable high fidelity digital to analog converter (DAC) and headphones amplifier buyers and listeners will be glad to know the Chord Hugo 2 adds new depth, soundstage, and intimacy to music via iPhones, iPads, or Android smartphones and tablets. Apple iPhones and iPads will need a camera adapter (CCK) via USB since Chord Electronics continues to balk at paying Apple licensing fees.
We recommend our Apple CCK + Silver Dragon USB for customers who love precision and detail when listening to their music and Apple CCK + Black Dragon for music lovers look for more warmth and better lower and mid-tones in their portable DAC listening experience.
Android phones and pads can connect directly to the new Chord Hugo 2. We recommend Silver Dragon USB for Android smartphone listeners who look for precision and detail and Black Dragon USB for those seeking warmth and robust low to mid-tones.
The Power of Upscaling
To upgrade your Chord Hugo2 to the next level, we recommend adding the Chord Hugo M Scaler.
The M Scaler is an instant upgrade to any existing DAC you have. It has the ability to upgrade your standard definition digital input signals and output them to your DAC at a max resolution of 352.8 or 384kHz via a single BNC SPDIF output or via a 176.4 or 192kHz via an Optical SPDIF output. If you have a Chord Electronics DAC that utilizes Dual Data Digital inputs, such as the Chord Qutest, Hugo2, Hugo TT2 or the Dave, then you can increase this output resolution to 705.6 or 768kHz via the M Scaler Dual BNC SPDIF outputs. The Hugo2 requires a special cable for the 3.5mm dual data input, so we’ve developed a Black Dragon Mini Coax Cable to connect it to the M Scaler.
Keith Howard wrote a wonderful profile on Rob Watts’ theories of why the upsampling filters are so critical to remarkable digital audio playback. Read the Hifi Critic article here.
Chord Hugo 2 Buzz
“There isn’t another DAC around at anywhere near this sort of price able to communicate so torrentially, so unambiguously, or so effortlessly. It’s expensive, but the boost in performance is worth every penny.”
What HiFi?, Best DAC £1000+
“The finest DAC I’ve ever seen/heard/used.”
John Darko, Knock Out Award
“If I sound deeply impressed by the Chord Hugo2, that’s because I am. At this moment in time I really can’t think of any other transportable headphone amp/DAC that can directly compete with Hugo2, or that even comes close.”
Chris Martens, HIFI+
Chord Hugo Features
Hugo 2 includes the latest FPGAs and WTA (Watts Transient Aligned) filters with new features:
- 7 Hour Battery Life
- 49,152 Taps
- 768kHz Micro USB Input
- 384kHz Coax Jack Input
- 192kHz Optical Input
- Bluetooth Apt X Input
- 1x 1/4″ Headphone Output
- 1x 3.5mm Headphone Output
- Unbalanced RCA Outputs
- DSD512 (8x) Native
- Native DSD Support
- 4x Playback Filters
- 3x Crossfeed Function
Press and Reviews
- 3-Year Warranty
- Clamshell precision machined aluminium casing with polycarbonate,buttons, acrylic signal window, and glass viewing portal. Available in a choice of two colours – natural silver, and satin black
- 2x Rechargeable custom Enix Energies 3.7v 9.6Wh Li-ion (lithium-ion (2600mAh) batteries*
- Tap length filter:
- 49,152 – 10 element Pulse Array design
- Play time:
- In excess of seven (7) hours
- Nominal four (4) hours via Micro USB at 1.8amps (fast charge) – Nominal eight (8) hours at 1amp (slow charge)
- Connectivity (input):
- Micro USB (White): 44.1kHz – 768kHz – 16bit – 32bit
Coax via 3.5mm Jack (Red): 44.1kHz – 768kHz – 16bit – 32bit
Optical (Green): 44.1kHz – 192kHz – 16bit – 24bit
- Connectivity (input wireless):
- Bluetooth (Bluetooth 2.1 +EDR with APTX) (Blue): 44.1kHz – 48kHz – 16bit
- Connectivity (output):
- 1x ¼” jack headphone output
1x 3.5mm jack headphone output
1x stereo (L & R) RCA output
- PCM support:
- 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 358.8kHz, 384kHz, 717.6kHz, and 768kHz.
- DSD support:
- Native playback supported. DSD64 (Single) to DSD512 (Octa-DSD)
- Volume control:
- Digital, activated in 1dB increments. Last known state saved upon shutdown, with exception of line-level mode
- Line-level mode:
- Activated via dual press of middle ‘Source’ and ‘Crossfeed’ buttons. Line level = 3v via all outputs. Reset by power cycle
- Power saving mode:
- Auto-shutdown after ten minutes of input inactivity
- Driver support:
- Driverless with Mac OS X and Linux, driver required for Windows OS
|Chipset:||Chord Electronics custom coded Xilinx Artix 7 (XC7A15T) FPGA|
|Pulse array:||10 element pulse array design|
|Frequency response:||20Hz – 20kHz +/- 0.2dB|
|Output stage:||Class A|
|THD:||<0.0001% 1kHz 3v RMS 300Ω|
|THD and noise at 3v RMS:||120dB at 1kHz 300ohms ‘A’ wighted (reference 5.3v)|
|Noise 2.6 uV ‘A’ weighted:||No measurable noise floor modulation|
|Signal to noise ratio:||126dB ‘A’ Weighted|
|Channel separation:||135dB at 1kHz 300Ω|
|Power output @ 1kHz 1% THD:||94mW 300Ω|
|Dimensions:||130mm (L) x 100mm (W) x 21mm (H)|
|Boxed Dimensions:||220mm (L) x 122mm (W) x 85mm (H)|
Only logged in customers who have purchased this product may leave a review.